Frank Condelli & Associates

RR #2, Almonte, Ontario, Canada, K0A 1A0

Phone: (613) 256-6763 Mail: Fkc43@aol.com

Vanagon Ride Height Survey

Please take measurements of your van and submit them to me at: Fkc43@aol.com, for inclusion in this survey. Please include what springs you have.

Measurements are taken from middle of the wheel arch to the centre of the axel.

1987 Vanagon Westfalia, new BOGE springs (Bus Depot) – mine measured after install January 2007

LH RH

FT: 16” 16-1/2”

RR: 16-1/8” 16-3/8”

Measured again March 17, 2008

FT: 14-1/2” 15-1/4”

RR: 15-1/2” 15-1/2”

1987 Vanagon Wolfsburg, original springs - mine

LH RH

FT: 15-1/4” 15-1/4”

RR: 15-3/4” 15-3/4”

1990 Vanagon Carat, original springs – mine

LH RH

FT: 14-3/4” 15-1/4”

RR: 15-3/4” 15-1/2”

1985 Vanagon Westfalia, original springs – customer

LH RH

FT: 16-3/4” 17-1/4”

RR: 16-1/4” 16-3/4”

1986 Vanagon Westfalia, original springs – customer

LH RH

FT: 16-1/2” 16-1/2”

RR: 16” 16”

1987 Vanagon Westfalia, original springs - customer

LH RH

FT: 16-1/4” 16-1/4”

RR: 16-1/2” 16-3/4”

1986 Vanagon Westfalia, original springs, friend

LH RH

FT: 16-1/4” 16-1/2”

RR: 16-1/4” 16-1/2”

1987 Vanagon Westfalia, original stock springs, Canadian MOT Speced, Phil Z.
   LH    RH
   FT: 16-1/4” 16-1/4”

   RR: 15-3/4” 16-5/8”

1990 Vanagon Westfalia Syncro, unloaded, stock springs – Bill Glenn

LH RH

FT: 18-1/8" 18-5/16"

RR: 18-3/8" 18-5/16"

1985 2wd Vanagon with stock springs and "doughnut" "spacers – Jonathan from Texas

LH RH

FT: 17 -3/8” 17-3/8”

RR: 17-3/8” 17-3/8”

1985 2wd Vanagon Westfalia with stock springs – Greg

LH RH

FT: 16.125” 16”

RR: 17” 17”

1987 2WD Vanagon Westfalia – Syncro.org springs, installed new 04/15/09, Frank Condelli

LH RH

FT: 16-1/2” 16-3/4”

RR: 16” 16-1/8”

1987 2WD Vanagon Westfalia 2WD, 80K miles, stock springs, Stephan Grisanti, Richmond, VA

LH RH

FT: 15-3/4” 15-3/4”

RR: 16-3/4” 16-1/2”

1991 Vanagon GL Westfalia full camper, Full gas, 100lbs of boats on top, Gary Lee roof racks on, Full water tank, Full Propane, 30lbs of gear inside. Trevor Reynolds, Airdrie, AB

LH RH

FT: 16.0” 16.5”

RR: 15.25” 16.25”

Back

This page was last updated on September 01, 2010

Home - Mechanics - Model Trains

This website was produced by Frank Condelli & Associates